Filter
Top Products
Appendix A. Troubleshooting 71
Appendix A
Troubleshooting
Problem
I followed the instructions for connecting the AP+4 hardware and
entered 10.0.0.200 in my web browser’s address bar, but I
cannot access the AP+4.
Solution
First, manually reset the AP+4: insert a paper clip into the
RESET opening on the back panel and press and hold for 10
seconds. After you’ve done that, re-enter 10.0.0.200 in your web
browser’s address bar.
If you still cannot access the AP+4, follow these steps to check
the computer’s TCP/IP settings.
Windows XP Users:
1
11
1
On the Windows desktop, click the
Start
button, open
Control Panel,
and double-click
Network Connections
.
2
22
2
Right-click the
Local Area Connection
icon and select
Properties
.
3
33
3
Highlight the
Internet Protocol (TCP/IP)
entry and click the
Properties
button.
4
44
4
Select
Use the following IP address
and enter
10.0.0.100
and
255.255.255.0
as the
IP address
and
Subnet mask
,
respectively.
5
55
5
Click
OK
, then click
Close.
6
66
6
Re-enter 10.0.0.200 in your web browser’s address bar.