Filter
Top Products
Chapter 5. TCP/IP Settings 33
DHCP Client
Range
The default range is shown: 10.0.0.1 to
10.0.0.199. Enter a different range if desired.
Click
Show Clients
to view a list of connected
devices.
Domain Name
If you have a large network that uses domains,
enter a name.
802.
1d Spanning
Tree
If the AP+4 is operating as a bridge, select
Enable
to use this protocol, which limits the
chances of network failure.
Clone MAC
Address
(Optional) Enter the MAC address of one of the
devices in the network, which will be sent to
the Internet Service Provider instead of the
AP+4’s address.
Click
Apply Changes
to save your entries or
Reset
to return to
the defaults.
Important
: After you make changes,
you must reboot all
devices
attached to the AP+4.