Filter
Top Products
Chapter 4. Wireless Configuration 21
Parameter
Select or enter . . .
Disable Wireless
LAN Interface
To deny access to the AP+4 network by
wireless devices, select this check box. When
you disable the wireless LAN, the
WLAN
LED
on the front panel stops flashing, indicating that
the AP+4 is no longer broadcasting its SSID.
Band
Select:
•
2.4 GHz B
if you have a network of 802.11b
devices
•
2.4 GHz G
if you have a network of 802.11g
devices
•
2.4 GHz B+G
if your network includes both
802.11b and 802.11g devices
Mode
Select a wireless operating mode:
AP
. In this mode the AP+4 handles local
network traffic wirelessly and through its four
LAN ports, and communicates via its WAN port
to an ADSL modem, cable modem, or other
Internet-connected device.
Client
. In this mode the AP+4 connects via its
LAN ports to up to four game stations or
computers, and links them wirelessly to a
Zoom X6 or other wireless router.
WDS.
In this mode the AP+4 acts as a
Repeater in WDS (
W
ireless
D
istribution
S
ystem) mode.
Note:
The AP+4 can act as a Repeater in
either Universal Repeater mode (see below) or
WDS mode. Most users who want to configure
the AP+4 as a repeater should choose
Universal Repeater mode, because it is easier
to set up than a WDS network and it provides
better performance. (See above).
AP+WDS.
In this mode the AP+4 acts as both
an Access Point and a Repeater in WDS
mode.
Network Type
(Client mode only) Select
Infrastructure
or
Ad
Hoc
.
SSID
Enter the AP+4’s SSID (network name). All
wireless devices should use the same SSID.
Channel Number
Infrastructure network
: Leave the default
Auto
.
The AP+4 automatically selects the channel
with the least interference.