Filter
Top Products
Prestige 100WH Internet Access Router
5-1
Chapter 5 Remote Node TCP/IP Configuration
Chapter 5
Remote Node TCP/IP Configuration
This chapter shows you how to configure the TCP/IP parameters of a remote node for LAN-
to-LAN application.
5.1 LAN-to-LAN Application
A typical LAN-to-LAN application is to use your Prestige to call from a branch office to the
headquarters, as depicted in the following Figure 5-1.
Figure 5-1. LAN-to-LAN Application with TCP/IP
For the branch office, you need to configure a remote node in order to dial out to the
headquarters. Additionally, you may also need to enter static routes if some services reside
beyond the immediate remote LAN.
Branch Office LAN
Corporate LAN
Modem
ISDN TA
Modem / ISDN TA
Prestige 100WH
Prestige 100WH
Modem
ISDN TA
Modem / ISDN TA