Filter
Top Products
Prestige 100WH Internet Access Router
6-7
Chapter 6 Dial-in Server Applications
Table 6-2. Default Dial-in Setup Fields (continued)
Field Description
Session Options:
Input Filter Sets
Output Filter Sets
In these fields, select the filter set(s) to apply to the incoming and
outgoing traffic between your Prestige and the dial-in user. Keep in mind
that the filter set(s) will only apply to all dial-in users but not the remote
nodes.
You can choose from 12 different filter sets. In addition, you can link up
to 4 filter sets together for further customization (for example, 1, 5, 9,
12).
Note that spaces and [-] symbol, are accepted in this field. For more
information on customizing your filter sets, see Chapter 7 – Filter
Configuration. The default is blank, i.e., no filters.
Session Options:
Idle Timeout
The Idle Timeout sets the limit on the time that the connection is idle
before the dial-in user is automatically disconnected. The idle timer is
reset whenever there is traffic from the Prestige.
This field will be used when the Prestige calls back to a dial-in user.
Once you have completed filling in Menu 13 - Default Dial-in Setup, press [Enter] at the
message [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time
to cancel.