Filter
Top Products
Prestige 304 Broadband Sharing Gateway with 4-Port Switch
5-8 The Advanced Screens
5.5.2 General Information About Static Routes
Each remote node specifies only the network to which the gateway is directly connected, and the Prestige has
no knowledge of the networks beyond. For instance, the Prestige knows about network N2 in the following
figure through remote node Router 1. However, the Prestige is unable to route a packet to network N3
because it doesn’t know that there is a route through the same remote node Router 1 (via gateway Router 2).
The static routes are for you to tell the Prestige about the networks beyond the remote nodes.
Figure 5-4 Example of Static Routing Topology
5.5.3 IP Static Route Setup
In the web configurator, click ADVANCED ->STATIC ROUTE. Click a static route index number, then
click Edit. Use the embedded help to assist you in filling out the required information for each static route.
5.6 The Parental Control Screen
This section provides a brief overview of how you can restrict/control Internet access by using the web
configurator. This screen allows schools and businesses to create and enforce Internet access policies tailored
to their needs. Use the tabs in this screen to:
• create policies that block certain words and specific URLs.
• define when the policies you create become active.
• send an alert/log to the e-mail address of your choice when a user attempts to access restricted material.
• assign the IP address of a user who will be exempt from policies (on the LAN).