Filter
Top Products
Prestige 304 Broadband Sharing Gateway with 4-Port Switch
The Maintenance Screens 6-1
Chapter 6
The Maintenance Screens
This chapter briefly describes the Maintenance screens in the web configurator.
6.1 Introduction
The web configurator allows easy maintenance of your Prestige and is recommended for all users. Advanced
users may use the CI commands included in the support notes. If you want to maintain your Prestige via
FTP/TFTP, refer to Chapter 7.
The following are Maintenance screens located in the web configurator. From the MAIN MENU, click
MAINTENANCE and the appropriate link to access each of the following screens.
6.2 The System Status Screen
Read-only information here includes system name, ZyNOS firmware version and routing protocols. Also
provided are the IP address, DHCP status and IP subnet mask of both the LAN and WAN.
6.2.1 System Status
Read-only information here includes port status and packet specific statistics. Also provided are “system up
time” and “poll interval(s)”. The Poll Interval(s) field is configurable.
6.3 The DHCP Table Screen
Read-only information here relates to your DHCP status. The DHCP table shows current DHCP Client
information (including IP Address, Host name and MAC Address) of all network clients using the DHCP
server.
6.4 The F/W (Firmware) Upgrade Screen
Follow the instructions in this screen to upload firmware to your Prestige.
6.5 The Configuration Screen
Backup, Restore and Default are tabs located in the CONFIGURATION screen. Follow the instructions in
each screen to perform the action described next.