Filter
Top Products
ZyWALL 5/35/70 Series User’s Guide
Chapter 24 Policy Route 398
The following table describes the labels in this screen.
24.5 Policy Route Edit
Click POLICY ROUTE to open the Policy Route Summary screen. Then click the edit icon
to open the Edit IP Policy Route screen.
Table 134 Policy Route Summary
LABEL DESCRIPTION
# This is the number of an individual policy route.
Active This field shows whether the policy is active or inactive.
Source Address/
Port
This is the source IP address range and/or port number range.
Destination
Address/Port
This is the destination IP address range and/or port number range.
Gateway Enter the IP address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward
packets to their destinations.
Protocol This is the IP protocol and can be ALL(0), ICMP(1), IGMP(2), TCP(6), UDP(17),
GRE(47), ESP(50) or AH(51).
Action This field specifies whether action should be taken on criteria Matched or Not
Matched.
Modify Click the edit icon to go to the screen where you can edit the routing policy on the
ZyWALL.
Click the delete icon to remove an existing routing policy from the ZyWALL. A
window display asking you to confirm that you want to delete the routing policy.
Move Type a policy route's index number and the number for where you want to put that
rule. Click Move to move the rule to the number that you typed.
The ordering of your rules is important as they are applied in order of their
numbering.