Filter
Top Products
ES-4124 User’s Guide
276 Chapter 42 Introducing Commands
igmp-
snooping
Enables IGMP snooping. 13
8021p-priority <0-7>
Sets the 802.1p priority for
outgoing igmp snooping packets.
13
host-timeout <1-16711450>
Sets the host timeout value. 13
leave-timeout <1-16711450>
Sets the leave timeout value 13
unknown-
multicast-frame
<drop|flooding>
Sets how to treat traffic from
unknown multicast group.
13
reserved-
multicast-group
<drop|flooding>
Sets how to treat traffic belonging
to reserved multicast groups.
13
interface port-channel
<port-list>
Enables a port or a list of ports for
configuration. See Section
42.11.4 on page 289 for more
details.
13
route-domain <ip-
address>/<mask-
bits>
Enables a routing domain for
configuration. See Section
42.11.5 on page 292 for more
details.
13
ip address <ip> <mask>
Sets the IP address and subnet
mask of the out-of-band
management port.
13
default-
gateway <ip>
Sets the default gateway’s IP
address for the out-of-band
management port.
13
name-server <ip>
Sets the IP address of a domain
name server.
13
route <ip> <mask>
<next-hop-ip>
Creates a static route. 13
<ip> <mask>
<next-hop-ip>
[metric
<metric>]
[name <name>]
[inactive]
Sets the metric of a static route or
deactivates a static route.
13
lacp
Enables Link Aggregation Control
Protocol (LACP).
13
system-priority <1-65535>
Sets the priority of an active port
using LACP.
13
loginPrece
dence
<LocalOnly |
LocalRADIUS |
RADIUSOnly>
Select which database the switch
should use (first) to authenticate
a user.
13
logins username <name>
password <pwd>
Configures up to four read-only
login accounts.
14
username <name> privilege <0-
14>
Assigns a privilege level to user
accounts.
14
Table 107 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE