Filter
Top Products
ES-4124 User’s Guide
Chapter 42 Introducing Commands 287
icmp
Allows ICMP management
packets.
13
snmp
Allows SNMP management. 13
ssh <socket-
number>
Allows SSH access on the
specified service port.
13
telnet <socket-
number>
Allows Telnet access on the
specified service port.
13
snmp-
server
[contact <system
contact>]
[location <system
location>]
Sets the geographic location and
the name of the person in charge
of this switch.
13
get-community
<property>
Sets the get community. 13
set-community
<property>
Sets the set community. 13
trap-community
<property>
Sets the trap community. 13
trap-destination
<ip>
Sets the IP addresses of up to
four stations to send your SNMP
traps to.
13
spanning-
tree
Enables STP on the switch. 13
<port-list>
Enables STP on a specified port. 13
<port-list> path-
cost <1-65535>
Sets the STP path cost for a
specified port.
13
<port-list>
priority <0-255>
Sets the priority for a specified
port.
13
hello-time <1-10>
maximum-age <6-
40> forward-delay
<4-30>
Sets Hello Time, Maximum Age
and Forward Delay.
13
help
Displays help information. 13
priority <0-
61440>
Sets the bridge priority of the
switch.
13
spq
Sets the switch to use Strict
Priority Queuing (SPQ).
13
ssh known-hosts
<host-ip>
<1024|ssh-
rsa|ssh-dsa>
<key>
Adds a remote host to which the
switch can access using SSH
service.
13
storm-
control
Enables broadcast storm control
on the switch.
13
syslog
Enables syslog logging. 13
Table 107 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE