Filter
Top Products
ES-4124 User’s Guide
292 Chapter 42 Introducing Commands
42.11.5 interface route-domain Commands
The following table lists the interface route-domain commands in configuration mode.
vlan-trunking
Disables VLAN trunking on the
port(s).
13
protocol-based-
vlan name <name>
ethernet-type
<ethernet-type>
vlan <vid>
priority <0-7>
Creates a protocol based VLAN
with the specified parameters.
13
inactive
Disables the protocol based VLAN. 13
pvid <1-4094>
The default PVID is VLAN 1 for all
ports. Sets a PVID in the range 1
to 4094 for the specified interface.
13
qos priority <0 ..
7>
Sets the quality of service priority
for an interface.
13
speed-duplex <auto|10-
half|10-
full|100-
half|100-
full|1000-full>
Sets the duplex mode (half or
full) and speed (10, 100 or
1000 Mbps) of the connection on
the interface. Selecting
auto
(auto-negotiation) makes one port
able to negotiate with a peer
automatically to obtain the
connection speed and duplex
mode that both ends support.
13
spq
Sets the port(s) to use Strict
Priority Queuing.
13
test
Performs an interface loopback
test.
13
vlan-stacking priority <0-7>
Sets the priority of the specified
port(s) in VLAN stacking.
13
role <access |
tunnel>
Sets the VLAN stacking port roles
of the specified port(s).
13
SPVID <1-4094>
Sets the service provider VID of
the specified port(s).
13
vlan-trunking
Enables VLAN Trunking on ports
connected to other switches or
routers (but not ports directly
connected to end users) to allow
frames belonging to unknown
VLAN groups to pass through the
switch.
13
weight <wt1>
<wt2> ... <wt8>
A weight value of one to eight is
given to each variable from wt 1 to
wt 8.
13
Table 108 interface port-channel Commands (continued)
COMMAND DESCRIPTION PRIVILEGE