Filter
Top Products
Chapter 9 The VPN Transport Screens
User’s Guide
102
9.3.3 Customer Interface Options
Click ADVANCED > VPN Transport > Customer Interface to configure the
VPNs used by the WiMAX Modem.
Figure 38 ADVANCED > VPN Transport > Customer Interface
The following table describes the icons in this screen.
The following table describes the labels in this screen.
Table 25 Advanced> VPN Transport > Customer Interface
ICON DESCRIPTION
Edit
Click to edit this item.
Delete
Click to delete this item.
Table 26 ADVANCED > VPN Transport > Customer Interface
LABEL DESCRIPTION
# The number of the item in this list.
Active This icon is green if the associated interface is enabled. The icon is grey
if the associated interface is disabled. Enable or disable an interface by
clicking its Edit icon and selecting or deselecting Active and clicking
Apply in the screen that displays.
Interface
Type This displays either Tagged or Untagged. A tagged interface controls
traffic with a specific IEEE 802.1Q VLAN tag, whereas an untagged
interface controls traffic that does not have a VLAN tag. There can be
only one untagged interface.
VLAN ID For a tagged interface, this displays the IEEE 802.1Q VLAN ID number.
For the untagged interface, -1 displays.
Mode This displays either B (bridging) or R (routing). Only the default
interface, interface 0, can be a routing interface.