Filter
Top Products
Chapter 5 Tutorials
User’s Guide
53
6 Next, go to the ADVANCED > NAT Configuration > General screen and select
the Enable Network Address Translation option.
7 Click Apply to save your settings.
8 Connect your computers to the WiMAX Modem’s Ethernet ports and you’re all set!
Note: You may need to configure the computers on your LAN to automatically obtain
IP addresses. For information on how to do this, see Appendix B on page 271.
5.2.1 Connecting Your Small Network to the Internet
Once your network is configured and hooked up, you will want to connect it to the
Internet next. To do this, just run the Internet Connection Wizard (Chapter 3
on page 41), which walks you through the process.
5.2.2 Changing Service Providers
This tutorial shows you how to import a new security certificate, which allows your
device to communicate with the company’s network servers. This is necessary if
you ever change Internet Service Providers and your WiMAX Modem is still
compatible with the new network. (In some cases it may not be.)
Goal: Import a new security certificate into the WiMAX Modem.
See Also: Chapter 15 on page 167.
1 In the Web Configurator, open the TOOLS > Certificates > My Certificates
screen and click the Import button.