Filter
Top Products
User’s Guide
189
CHAPTER 16
The Firewall Screens
16.1 Overview
Use the TOOLS > Firewall screens to manage WiMAX Modem’s firewall security
measures.
Originally, the term firewall referred to a construction technique designed to
prevent the spread of fire from one room to another. The networking term
"firewall" is a system or group of systems that enforces an access-control policy
between two networks. It may also be defined as a mechanism used to protect a
trusted network from an untrusted network. Of course, firewalls cannot solve
every security problem.
A firewall is one of the mechanisms used to establish a network security perimeter
in support of a network security policy. It should never be the only mechanism or
method employed. For a firewall to guard effectively, you must design and deploy
it appropriately. This requires integrating the firewall into a broad information-
security policy. In addition, specific policies must be implemented within the
firewall itself.
16.1.1 What You Can Do in This Chapter
•The Firewall Setting screen (Section 16.2 on page 190) lets you configure the
basic settings for your firewall.
•The Service Setting screen (Section 16.3 on page 193) lets you enable service
blocking, set up the date and time service blocking is effective, and to maintain
the list of services you want to block.
16.1.2 What You Need to Know
The following terms and concepts may help as you read through this chapter.
About the WiMAX Modem Firewall
The WiMAX Modem firewall is a stateful inspection firewall and is designed to
protect against Denial of Service attacks when activated. The WiMAX Modem's
purpose is to allow a private Local Area Network (LAN) to be securely connected to