Filter
Top Products
Chapter 9 The VPN Transport Screens
User’s Guide
105
device must be the same as the egress label on the peer device, as shown in the
following figure. A is your WiMAX Modem and B is your service provider’s router.
Figure 40 Ethernet Pseudowire Settings Example
Click ADVANCED > VPN Transport > Ethernet Pseudowire to configure the
WiMAX Modem’s Ethernet pseudowires.
Figure 41 Advance > VPN Transport > Ethernet Pseudowire
The following table describes the icons in this screen.
The following table describes the labels in this screen.
INGRESS LABEL: X
EGRESS LABEL: Y
INGRESS LABEL: Y
EGRESS LABEL: X
PSEUDOWIRE
TO Y
TO X
A
B
Table 28 Advanced> VPN Transport > Ethernet Psuedowire
ICON DESCRIPTION
Edit
Click to edit this item.
Delete
Click to delete this item.
Table 29 ADVANCED > VPN Transport > Ethernet Pseudowire
LABEL DESCRIPTION
# The number of the item in this list.
Active This icon is green if the associated pseudowire is enabled. The
icon is grey if the associated pseudowire is disabled. Enable or
disable a pseudowire by clicking its Edit icon.
MPLS VC Label