Filter
Top Products
Chapter 5 Tutorials
User’s Guide
60
1 Connect an analog phone to your WiMAX Modem, as described in the included
Quick Start Guide.
2 Open the VOICE > Service Configuration > SIP Setting screen, then enter
the required information as presented above.
Tip: Unless otherwise told by a SIP service provider, you can often leave the Port
settings at their default values.
3 Click Apply to save your changes.
4 Next, click VOICE > Phone > Analog Phone. This is where you will configure
your phone settings to bind your SIP settings to the connected phone.
Select a phone from the Phone Port Settings list, then select whether you want
to use the SIP account settings for outgoing calls, incoming calls, or both.
Click Apply to save your settings and you can begin placing Internet phone calls!
Go to the next section for further instructions.