Filter
Top Products
Chapter 21 Maintenance
EMG1302-R10A User’s Guide
152
The following table describes the labels in this screen.
21.4 Account Screen
It is strongly recommended that you change your EMG1302-R10A's password.
If you forget your EMG1302-R10A's password (or IP address), you will need to reset the device.
See Section 21.8 on page 158 for details.
Click Maintenance > Account > User Account. The screen appears as shown.
Figure 92 Maintenance > Account > User Account
The following table describes the labels in this screen.
21.4.1 Account Setup Screen
Account Setup screen allows you to change a user account password.
Table 61 Maintenance > General
LABEL DESCRIPTION
System Name System Name is a unique name to identify the EMG1302-R10A in an Ethernet network.
Domain Name Enter the domain name you want to give to the EMG1302-R10A.
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the session times
out. The default is 5 minutes. After it times out you have to log in with your password again.
Very long idle timeouts may have security risks. A value of "0" means a management
session never times out, no matter how long it has been left idle (not recommended).
Apply Click Apply to save your changes back to the EMG1302-R10A.
Cancel Click Cancel to exit this screen without saving.
Table 62 Maintenance > Account > User Account
LABEL DESCRIPTION
User Account Entries
# This is the index number of a user account.
User Name The EMG1302-R10A’s user account name.
Group The belonging of the user account.
Modify Click the Edit icon to open the Account Setup screen. Account Setup screen allows to
change the user account password.