Filter
Top Products
Chapter 8 Wireless LAN
EMG1302-R10A User’s Guide
83
8.7 MAC Filter
The MAC filter screen allows you to configure the EMG1302-R10A to give exclusive access to
devices (Allow) or exclude devices from accessing the EMG1302-R10A (Deny). Every Ethernet
device has a unique MAC (Media Access Control) address. The MAC address is assigned at the
factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You
need to know the MAC address of the devices to configure this screen.
To change your EMG1302-R10A’s MAC filter settings, click Configuration > Network > Wireless
LAN > MAC Filter. The screen appears as shown.
Figure 41 Configuration > Network > Wireless LAN > MAC Filter
Group Key Update
Timer
The Group Key Update Timer is the rate at which the RADIUS server sends a new
group key out to all clients.
Note: No Security and WPA2-PSK can be configured when WPS is enabled.
Apply Click Apply to save your changes back to the EMG1302-R10A.
Cancel Click Cancel to exit this screen without saving.
Table 24 Wireless LAN > More AP (continued)
LABEL DESCRIPTION