Filter
Top Products
Technical Reference for ZyXEL omni.net series
B-11
All the Following Commands Require a 'AT' Prefix
S Com. bit dec hex Function and description +Def./Ref.
1 1 Can NOT get busy tone from Phone 1.
1 0 0 Can get busy tone from Phone 2.
2 2 Can NOT get busy tone from Phone 2.
2 0 (*) 0 Disable the 'RING' message to DTE port for analog call.
4 4 Enable the 'RING' message to DTE port for analog call.
S79= bit dec hex Bit mapped register. +000
0 0 (*) 0 Ignore POTS port 1 global incoming call when port 1 is busy.
1 1 Discard POTS port 1 global incoming call when port 1 is
busy (Sending RELEASE COMPLETE).
0 0 (*) 0 Ignore POTS port 2 global incoming call when port 2 is busy.
2 2 Discard POTS port 2 global incoming call when port 2 is
busy (Sending RELEASE COMPLETE).
2 0 0 POTS 1 call-waiting/multiple-answer disabled.
4 (*) 4 POTS 1 call-waiting/multiple-answer enabled.
3 0 0 POTS 2 call-waiting/multiple-answer disabled.
8 (*) 8 POTS 2 call-waiting/multiple-answer enabled.
4 0 (*) 0 POTS port 1 is connected to a telephone.
16 10 POTS port 1 is connected to a Fax/Modem.
5 0 (*) 0 POTS port 2 is connected to a telephone.
32 20 POTS port 2 is connected to a Fax/Modem.
7 0 (*) 0 Sending RELEASE COMPLETE will cause 'call reject’ for
'ATH1'.
128 80 Sending RELEASE COMPLETE will cause 'user busy’ for
'ATH1'.
S80= bit dec hex Bit-mapped register +000
4 0 (*) 0 Not sending Low Layer Compatibility information for POTS
port 2.
16 10 Sending Low Layer Compatibility information for POTS port
2.
6 0 (*) 0 Not sending Low Layer Compatibility information for ISDN
data call.