Filter
Top Products
Technical Reference for ZyXEL omni.net series
1-4
Installing Your ZyXEL omni.net ISDN TA
For detailed instructions on how to install and configure your ZyXEL omni.net ISDN TA with the
ZyXEL ISDN Configuration Manager (ZyXEL ICM), please refer to the Quick Start Guide
particular to your device that comes with your omni.net package.
Follow these steps to perform a quick and correct installation, as outlined in the ZyXEL omni. net
LCD series Quick Start Guide or ZyXEL omni.net Plus/D Quick Start Guide.
Step 1. Connect the omni.net DTE port to your computer's serial port by using the RS232
cable.
Step 2. Connect the omni.net ISDN TA to your ISDN line via the NT-1 ISDN Network
Termination device.
Step 3. Perform the setup for Windows 95/98/NT by installing the Windows 95/98/NT
driver (INF file.)
Step 4. Install the ZyXEL ISDN Configuration Manager and configure for PPP protocol
(Internet access.)
Step 5. Configure Windows 95/98 Dial-Up Networking.
Step 6. Plug analog devices such as telephone, fax, modem, answering machine, into the
two analog ports of your omni.net (for omni.net Plus and omni.net LCD/LCD+M
only.)