Filter
Top Products
Technical Reference for ZyXEL omni.net series
1-2
! Two application program interfaces including ZyXEL ISDN AT Commands and CAPI
2.0.
! Built-in 56K modem that can communicate with other analog Modem/Fax through an
ISDN line (for omni.net LCD+M only).
Intelligent Features
! Automatic ISDN/analog call detection.
! Automatic dial-in and dial-out B-channel protocol detection.
! Supplementary Service for USA NI-1, DMS-100 switches and European DSS1 switch,
including call waiting, call hold/retrieve, three-way conferencing, call forwarding, etc.
! Feature Phone operation, including call back, broker, and three-way conferencing, etc.
! Two analog telephone ports with metering pulse function.
! Callback security with password protection.
! Flash EPROM memory for easy firmware upgrades.
! Provides FSK/DTMF Caller ID signal on analog ports.
Specifications
Status Display
Status LED, 20 x 2 LCD panel (LCD/LCD+M only)
Flow Control
Software XON/XOFF or hardware CTS/RTS
Configuration Setting
Software programmable with nonvolatile memory for profile storage
Diagnostics
Self and loopback tests
Line Interface
RJ-45 for S/T interface
DTE Interface
DB-25 connector
Weight
omni.net LCD: 448 g; omni.net LCD+M: 557g
omni.net Plus: 379 g; omni.net D: 358 g
Dimensions
omni.net LCD/LCD+M: 192mm (W) x 42.5mm (H) x 145.6mm(L)
omni.net Plus/D: 183mm (W) x 36.5mm (H) x 135.0mm(L)
Table 1. Specifications