Filter
Top Products
Technical Reference for ZyXEL omni.net series
B-17
All the Following Commands Require a 'AT' Prefix
S Com. bit dec hex Function and description +Def./Ref.
16 10 Use Speech Bearer service whenever possible for POTS
port, Phone 2.
5 0 (*) 0 Use 3.1KHz Bearer service whenever possible for POTS
port, Phone 1.
32 20 Use Speech Bearer service whenever possible for POTS
port, Phone 1.
6 0 (*) 0 Enable the a/b adapter to accept global calls.
64 40 Forbid the POTS port to accept global calls.
7 0 (*) 0 Enable analog incoming calls.
128 80 Reject analog incoming calls.
(pure ISDN data).
S119= bit dec hex
0 0 (*) 0 Disable callback function (See 'AT*CG).
1 1 Enable callback function.
1 0 (*) 0 D-channel layer-2(LAPD) 'point-to-multipoint' operation
mode.
(dynamic TEI, 64 <= n <= 126).
2 2 D-channel layer-2(LAPD) 'point-to-point' operation mode.
(static TEI=0).
2 0 (*) 0 Disable 'overlap receiving' signaling function.
(for ISDN supplementary service 'MSN').
4 4 Enable 'overlap receiving' signaling.
(for ISDN supplementary service DDI).
3 0 (*) 0 When no MSN (EAZ) is matched, the inbound call will be
ignored.
Note: default = 1 for USA, default = 0 for other
8 8 When no MSN (EAZ) is matched, use default protocol to
accept.
4 0 0 V.110 user rate = 19200 bps if DTE speed greater than
19200 bps
16
(*)
10 V.110 user rate = 38400 bps if DTE speed greater than
38400 bps