Filter
Top Products
Chapter 17 Remote Management Configuration
P-660HWP-Dx User’s Guide
38
17.4 Configuring Telnet
Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.
Figure 138 Remote Management: Telnet
The following table describes the labels in this screen.
17.5 Configuring FTP
You can upload and download the P-660HWP-Dx’s firmware and configuration files using
FTP, please see the chapter on firmware and configuration file maintenance for details. To use
this feature, your computer must have an FTP client.
To change your P-660HWP-Dx’s FTP settings, click Advanced > Remote MGMT > FTP
tab. The screen appears as shown.
Table 99 Remote Management: Telnet
LABEL DESCRIPTION
Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Access Status Select the interface(s) through which a computer may access the P-660HWP-Dx
using this service.
Secured Client
IP
A secured client is a “trusted” computer that is allowed to communicate with the P-
660HWP-Dx using this service.
Select All to allow any computer to access the P-660HWP-Dx using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the P-660HWP-Dx using this service.
Apply Click Apply to save your customized settings and exit this screen.
Cancel Click Cancel to begin configuring this screen afresh.