Filter
Top Products
Appendix C Internal SPTGEN
P-660HWP-Dx User’s Guide
36
" DO NOT alter or delete any field except parameters in the Input column.
This appendix introduces Internal SPTGEN. All menus shown in this appendix are example
menus meant to show SPTGEN usage. Actual menus for your product may differ.
Internal SPTGEN File Modification - Important Points to Remember
Each parameter you enter must be preceded by one “=”sign and one space.
Some parameters are dependent on others. For example, if you disable the Configured field in
menu 1 (see Figure 184 on page 35), then you disable every field in this menu.
If you enter a parameter that is invalid in the Input column, the P-660HWP-Dx will not save
the configuration and the command line will display the Field Identification Number. Figure
185 on page 36, shown next, is an example of what the P-660HWP-Dx displays if you enter a
value other than “0” or “1” in the Input column of Field Identification Number 1000000
(refer to Figure 184 on page 35).
Figure 185 Invalid Parameter Entered: Command Line Example
The P-660HWP-Dx will display the following if you enter parameter(s) that are valid.
Figure 186 Valid Parameter Entered: Command Line Example
Internal SPTGEN FTP Download Example
1 Launch your FTP application.
2 Enter "
bin". The command “bin” sets the transfer mode to binary.
3 Get "
rom-t" file. The command “get” transfers files from the P-660HWP-Dx to your
computer. The name “
rom-t” is the configuration filename on the P-660HWP-Dx.
4 Edit the "
rom-t" file using a text editor (do not use a word processor). You must leave
this FTP screen to edit.
field value is not legal error:-1
ROM-t is not saved, error Line ID:10000000
reboot to get the original configuration
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2
Please wait for the system to write SPT text file(ROM-t)...
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2