Filter
Top Products
Appendix D Setting up Your Computer’s IP Address
P-660HWP-Dx User’s Guide
46
Figure 202 Macintosh OS X: Network
4 For statically assigned settings, do the following:
•From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your P-660HWP-Dx in the Router address box.
5 Click Apply Now and close the window.
6 Turn on your P-660HWP-Dx and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.
Linux
This section shows you how to configure your computer’s TCP/IP settings in Red Hat Linux
9.0. Procedure, screens and file location may vary depending on your Linux distribution and
release version.