Filter
Top Products
VSG-1200 User’s Guide
Chapter 27 LAN and WAN Setup Using the SMT 213
The following table describes the fields in this screen.
Table 73 SMT: System Status
FIELD DESCRIPTION
System Name This field displays the name of the VSG for identification purposes.
Domain Name This field displays the domain name.
Console Port
Speed
This field displays the console port speed (1200, 2400, 4800, 9600, 14400, 19200,
38400, 57600, or 115200).
Web Server Port This field displays the port number for the embedded web server.
If the port number is not 80, then you need to append the port number to the WAN
port IP address to access the VSG web configurator. For example, if 8010 is the
web server port number, then you must enter “http://www.192.168.1.1:8010” in the
address bar on the web browser where 192.168.1.1 is the WAN or LAN port IP
address.
E-mail Server IP
Address
This field displays the IP address of the e-mail server to which the VSG forwards
the e-mail when the subscriber’s e-mail server(s) is behind a NAT-enabled network
or firewall.
WAN
Configuration
WAN Type? (D/S/
P/T)
This field displays the WAN IP address assignment method (Static IP Setting or
DHCP Client).
IP Address This field displays the WAN IP address of the VSG.
Subnet Mask This field displays the subnet mask on the WAN port.
Gateway This field displays the IP address of the default gateway.
Primary DNS
Server
This field displays the IP address of the primary DNS server.
Secondary DNS
Server
This field displays the IP address of the secondary DNS server.
DHCP
Configuration
DHCP Service?
(D/R/S)
This field displays the DHCP mode (Server, Relay or Disable) on the LAN port.
Start IP Address This field is visible when the DHCP Service field is Server.
This field displays the first of the contiguous addresses in the IP address pool.
DHCP Pool Size This field is visible when the DHCP Service field is Server.
This field displays the size of the DHCP client pool.
Lease Time This field is visible when the DHCP Service field is Server.
This field displays for how many minutes a DHCP client is allowed to use an
assigned IP address.
Agent Server IP
Address
This field is visible when the DHCP Service field displays Relay.
This field displays the IP address of the DHCP relay agent.
Primary/
Secondary DNS IP
Address
These fields are visible when the DHCP Service field is Server.
These two fields display the IP address(es) of the DNS server(s).
Press any key at the “Press any to return” prompt to go back to the previous screen.