Filter
Top Products
VSG-1200 User’s Guide
Chapter 9 Dynamic Subscriber Accounts 99
1 Connect the statement printer to the port labeled CONSOLE. Refer to Section 2.2
“Hardware Connections” on page 36 for more information.
2 Configure the Console Type field in the System screen. Refer to Section 3.5 “General
System Setting” on page 44.
3 Turn on the statement printer and make sure there is printing paper.
4 Press the button on the statement printer. A dynamic account is generated and the account
information should be printed. Refer to Figure 84 on page 134 for a printout example.
9.4 Viewing the Dynamic Account List
To display the dynamic account list, click Dynamic Account List. Click a heading to sort the
entries in ascending or descending order based on the column if applicable.
Figure 54 Dynamic Account List
The following table describes the labels in this screen.
Note: The settings of the buttons on the statement printer correspond to the
three SP-200 buttons you set in the Dynamic Account Operator Panel
screen. Refer to Section 9.2 “Dynamic Account General Settings” on
page 95.
Table 28 Dynamic Account List
LABEL DESCRIPTION
Refresh Click Refresh to update this screen.
Backup Click Backup to backup the account information to a computer. Refer to Section
9.4.1 “Backing Up the Dynamic Account List” on page 100.
Print List Click Print List to print all account information to the local printer connected to the
computer that you use to configure the VSG.
Note: This does NOT display a printout preview window.
S/N This field displays the serial number (or the Index number) of a dynamic account.
Username This field displays the account user name. Click the heading to sort the entries in
ascending or descending order based on this column.
Password This field displays the account password.