Filter
Top Products
VSG-1200 User’s Guide
Chapter 4 LAN, WAN and Server Setup 59
Figure 21 System Setting: WAN/LAN: PPPoE
The following table describes the related fields in this screen.
Table 8 System Setting: WAN/LAN: PPPoE
FIELD DESCRIPTION
WAN Port Mode PPPoE Select this option to activate PPPoE support.
Username Enter the user name exactly as your ISP assigned. If assigned a name in the
form user@domain where domain identifies a service name, then enter both
components exactly as given.
Password Enter the password associated with the user name above.
PPP MTU Setting Enter the size of a Maximum Transmission Unit (MTU).
TCP MSS Setting Enter the size of the Maximum Segment Size (MSS).
Service Name Enter the name of your PPPoE service.
Connect on Demand Select this option when you don’t want the connection up all the time and specify
an idle timeout in the Max Idle Time field (maximum 65535 minutes). This is the
default setting with an idle timeout of 10 minutes.
Keep Alive Select this option when you want the Internet connection up all the time and
specify a redial period in the Redial Period field (maximum 65535 seconds).
When disconnected, the VSG will attempt to bring up the connection after the
redial period.