Diagnostics and Troubleshooting 3-59
The System Configuration Utility setting should resemble the following when you enable ASR
to restart into the operating system:
Table 3-20
OS Restart SCU Setting for ASR-2
Option Setting
Serial Interface COM1
Dial-in status Disabled
Dial-out status Disabled
Dial-out string 555-1234
Network status Disabled
Network protocol IPX
Network controller Compaq
Network host name CPQHOU
Network card slot Slot #
Network frame type ETHERNET_II
Network IP address xxx.xxx.xxx.xxx
Network IP net mask xxx.xxx.xxx.xxx
Network IP router address xxx.xxx.xxx.xxx
ASR-2 Security
The standard Compaq password features function differently during ASR-2 than during a
typical system startup. During ASR-2, the system does not prompt for the power-on password.
This allows ASR-2 to restart the operating system or Compaq Utilities without user
intervention.
To maintain system security, set the server to start in Network Server Mode (an option in the
System Configuration Utility). This option ensures that the server keyboard is locked until you
enter the keyboard password.
Select an administrator password (an option in the System Configuration Utility). During
attended ASR-2 (local or remote), you must enter this administrator password before any
modifications can be made to the server configuration.
