show spanning-tree msti
View the multiple spanning tree instance.
S6000
Syntax
show spanning-tree msti [instance-number [brief]] [guard]
Parameters
instance-
number
(Optional) Enter the multiple spanning tree instance number.
The range is from 0 to 63.
brief (Optional) Enter the keyword brief to view a synopsis of the
MST instance.
guard (Optional) Enter the keyword guard to display the type of
guard enabled on an MSTP interface and the current port
state.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.4.2.1 Support for the optional keyword guard was added on the
C-Series, S-Series, and E-Series TeraScale.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.4.1.0 Expanded to display the port error disable state (EDS)
loopback BPDU inconsistency causes.
Usage
Information
Enable the multiple spanning tree protocol prior to using this command.
Example
Dell#show spanning-tree msti 10
MSTI 10 VLANs mapped 101-105
Bridge Identifier has priority 32768, Address 0001.e802.3506
Configured hello time 2, max age 20, forward delay 15, max
1006
Multiple Spanning Tree Protocol (MSTP)
