ipv6 dhcp snooping trust
Configure an interface as trusted for DHCP snooping.
Syntax
[no] ipv6 dhcp snooping trust
To disable dhcp snooping trusted capability on this interface, use the no ipv6
dhcp snooping trust command.
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S4810, S4820T, S6000 and Z-Series.
ip dhcp source-address-validation
Enable the IP Source Guard.
Syntax
[no] ip dhcp source-address-validation [ipmac] [vlan vlan-id]
Parameters
ipmac Enable IP+MAC Source Address Validation.
vlan vlan-id (OPTIONAL) SAV validates the source IP address along with
the source VLAN ID against the DHCP snooping binding
table.
Defaults Disabled
Command
Modes
INTERFACE
INTERFACE PORTCHANNEL
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.6(0.0) Added the vlan keyword and the vlan-id variable .
Introduced support for SAV on port channels interfaces.
9.0.2.0 Introduced on the S6000.
570
Dynamic Host Configuration Protocol (DHCP)
