Version Description
7.7.1.0 Introduced on the C-Series.
Usage
Information
The default-metric command in BGP sets the value of the BGP
MULTI_EXIT_DISC (MED) attribute for redistributed routes only.
Related
Commands
bgp always-compare-med — enables comparison of all BGP MED attributes.
redistribute — redistributes routes from other routing protocols into BGP.
deny bandwidth
Enables you to specify link band width extended-community attribute as the matching criteria to deny
incoming or outgoing traffic.
Syntax
deny bandwidth
To disable this setting, enter the no deny bandwidth command.
Parameters
bandwidth Enter the keyword bandwidth to specify extended-
community attribute as the matching criteria for denying
traffic. The range is from 0 to 102400.
Defaults N/A
Command
Modes
EXTENDED COMMUNITY LIST
Command
History
Version Description
9.7(0.0) Introduced on the S-Series.
Related
Commands
permit bandwidth – specify link band width extended-community attribute as the
matching criteria to permitting incoming or outgoing traffic..
description
Enter a description of the BGP routing protocol
S6000
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description Enter a description to identify the BGP protocol (80
characters maximum).
Border Gateway Protocol
377
