This password provides limited security as it is processed as plain text.
isis priority
Set the priority of the designated router you select.
Syntax
isis priority value [level-1 | level-2]
To return to the default values, use the no isis priority [value] [level-1
| level-2] command.
Parameters
value This value sets the router priority. The higher the value, the
higher the priority. The range is from 0 to 127. The default is
64.
level-1 (OPTIONAL) Specify the priority for Level 1. This setting is the
default.
level-2 (OPTIONAL) Specify the priority for Level 2.
Defaults value = 64; level-1 (if not otherwise specified).
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OSCommand Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage
Information
You can configure priorities independently for Level 1 and Level 2. Priorities
determine which router on a LAN is the designated router. Priorities are advertised
within hellos. The router with the highest priority becomes the designated
intermediate system (DIS).
NOTE: Routers with a priority of 0 cannot be a designated router.
876
Intermediate System to Intermediate System (IS-IS)
