Chapter 7 Network Setting
WiMAX Device Configuration User’s Guide
104
7.11 Static Route
Use these settings to create fixed paths through the network.
Click Network Setting > Route > Static Route to open this screen as shown next.
Figure 52 Static Route Screen
This screen contains the following fields:
7.12 Static Route Add
Use these settings to configure a static route.
MAC Address
Enter the MAC addresses of the wireless devices that are allowed or
denied access to the WiMAX Device in these address fields. Enter the
MAC addresses in a valid MAC address format, that is, six hexadecimal
character pairs, for example, 12:34:56:78:9a:bc.
Delete Click to delete a specific MAC address from the list.
Add Click to add a MAC address to the list.
OK Click this button when you are done adding a MAC Address.
Table 34 MAC Address Filter (continued)
LABEL DESCRIPTION
Table 35 Static Route
LABEL DESCRIPTION
Destination This field displays the destination IP address of the static route.
Subnet Mask This field displays the subnet mask of the static route.
Next Hop This field displays next hop information of the static route.
Metric This field displays the static route metric.
Add Click this to add a new static route to the list.
