Chapter 7 Network Setting
WiMAX Device Configuration User’s Guide
108
7.14.1 Port Forwarding Wizard
Use this wizard to set up a port forwarding rule for incoming service requests to the ports on your
local network.
Click Network Setting > NAT > Port Forwarding > Wizard to open this screen as shown next.
Figure 56 Port Forwarding Wizard Screen
This screen contains the following fields:
7.15 Port Trigger
Use these settings to automate port forwarding and allow computers on local network to provide
services that would normally require a fixed address on the local network.
Table 39 Port Forwarding Wizard
LABEL DESCRIPTION
Active Select this to make this port forwarding rule active.
Port Forward Rule Select the type of port forwarding rule.
Rule Name Enter a name for the port forwarding rule.
Protocol Select the port forwarding protocol.
Incoming Start
Port
Enter the starting port number for incoming traffic for the port forwarding rule.
Incoming End
Port
Enter the ending port number for incoming traffic for the port forwarding rule.
Forwarding Start
Port
Enter the starting port number for forwarded traffic for the port forwarding rule.
Forwarding End
Port
Enter the ending port number for forwarded traffic for the port forwarding rule.
Server IP Enter the port forwarding server IP address.
