Chapter 11 The VoIP Line Screens
WiMAX Device Configuration User’s Guide
172
11.2 Phone
Click VoIP > Line 1 (or Line 2) > Phone to configure phone related settings.
Figure 98 Phone
The following table describes the labels in this screen.
11.3 Voice
Click VoIP > Line 1 (or Line 2) > Voice to configure voice settings.
Figure 99 Voice
The following table describes the labels in this screen.
Table 77 Phone
LABEL DESCRIPTION
Phone
Hook Flash Detect
Upper Bound
Enter the number of milliseconds for the upper bound of a quick on-hook and off-
hook cycle in order to recognize a hook flash event.
Hook Flash Detect
Lower Bound
Enter the number of milliseconds for the lower bound of a quick on-hook and off-
hook cycle in order to recognize a hook flash event.
Voice Tx Level
Select the volume level transmitted by the WiMAX Device. -9 is the quietest, and
9 is the loudest.
Voice Rx Level
Select the volume level transmitted to the WiMAX Device. -9 is the quietest, and
9 is the loudest.
Table 78 Voice
LABEL DESCRIPTION
VAD - Voice Activity Detection
Enable VAD Enable Voice Active Detector (VAD) to have the WiMAX Device stop transmitting
voice traffic when you are not speaking using the detection method. This reduces
the bandwidth the WiMAX Device uses.
