Chapter 7 Network Setting
WiMAX Device Configuration User’s Guide
106
Click Network Setting > Route > RIP to open this screen as shown next.
Figure 54 RIP Screen
This screen contains the following fields:
Table 37 RIP
LABEL DESCRIPTION
General Setup
Enable Select this to enable RIP on the WiMAX Device.
Redistribute
Active This indicates whether a route is being redistributed.
Type This indicates what type of route is being redistributed.
Metric This indicates the metric that is being used for redistribution.
Edit Click this to edit a selected route.
OK Click this to save any changes to the redistribution table.
LAN
Direction Set the LAN network direction to use with RIP.
Version Set the RIP version to use.
Authentication Use this option to enable or disable RIP authentication.
Authentication ID Enter the authentication ID to use for RIP authentication.
Authentication
Key
Enter the authentication key to use for RIP authentication.
WAN
Direction Set the WAN network direction to use with RIP.
Version Set the RIP version to use.
