Chapter 6 WiMAX
WiMAX Device Configuration User’s Guide
86
Click WiMAX > Wide Scan to open this screen as shown next.
Figure 37 Wide Scan Screen
This screen contains the following fields:
Table 21 Wide Scan
LABEL DESCRIPTION
Wide Scan Settings
Auto Wide
Scan
Use this to enable (Yes) or disable (No) automatically scanning for base
stations.
Wide Scan Range
Start
Frequency
(KHz)
Enter the start frequency in kilohertz (KHz) for a wide scan range.
End
Frequency
(KHz)
Enter the end frequency in kilohertz (KHz) for a wide scan range.
Step (KHz) Enter the step increment in kilohertz (KHz) that the wide scan jumps each time it
scans between the start and end frequencies.
Bandwidth
(MHz)
Enter the frequency bandwidth to be scanned.
Delete Click this to remove a range of frequencies from the wide scan range list.
Add Click this to add a range of frequencies to the wide scan range list.
OK Click this so save any changes to the wide scan range list.
Wide Scan Result
This table displays the available frequency band(s) found through the wide scan.
Frequency
(KHz)
This field displays the frequency in kilohertz (KHz).
Bandwidth
(MHz)
This field displays the bandwidth in megahertz (MHz).
Search Click this to initiate a wide scan.
Clear Click this to clear the wide scan results.
