2Wire 3801HGV Network Router User Manual


 
Connecting HPNA Interface to IPTV set top Box 9
HomePortal 3801HGV Gateway User Guide Installing the HomePortal 3801HGV Gateway
2. To connect 2 phones:
a. Connect one end of the line splitter to the HomePortal 3801HGV gateway Voice 1&2
port.
b. Connect the phone cables to the first and second jack of the splitter.
Figure 7: VoIP Connection Using Splitter
Connecting HPNA Interface to IPTV set top Box
The HomePortal 3801HGV gateway can be configured to use IPTV services through the cable port.
Follow these steps to connect the gateway to the set top box:
1. Connect one end of the coaxial cable to the CABLE port and the other end to the CABLE IN
port of Ethernet over Coax adapter.
2. Connect one end of the Ethernet cable to the Ethernet port of Ethernet over Coax adapter
and the other end to the Ethernet port on the set top box.
Note The Ethernet over Coax adapter is independently powered, and should be installed close to
a power outlet. Refer to the manufacturer’s instructions that came with the Ethernet over
Coax adapter.