2Wire 3801HGV Network Router User Manual


 
Configuring Firewall Settings 77
HomePortal 3801HGV Gateway User Guide Configuring Firewall Settings
sent to 4000. Subsequent ports will be mapped accordingly; 101 will be sent to 4001,
102 will be sent to 4002, and so on.
8. Select the application type from the Application Type drop-down list.
9. Click Add to List. This creates a new application profile. Also, the configured information
appears in the Definition List section of the same page.
You can also view the newly created application listed in the Applications List drop-down
list on the Applications, Pinholes and DMZ page.
10. Click Back to return to the Applications, Pinholes and DMZ page.
11. To edit a user defined applicaitons, click Edit or delete user-defined application in the Edit
firewall settings for this computer section. This lets you edit an existing profile or assign
additional TCP or UDP ports to an existing profile. The Edit or Delete a User-Defined
Application page appears.
Note You can add the definition of the profile only when it has not been added to the Hosted
Application list box. If the profile is added in the list of hosted applications and you want to
modify it, then you need to first remove it from the Hosted Applications list box.
12. Select the application you want to modify from the User defined applications list box.
13. Click Edit. The Firewall Application Profile Definition page appears.