Filter
Top Products
Viewing Broadband Status 39
HomePortal 3801HGV Gateway User Guide Configuring Broadband Settings
Refer to the following table for description of the DSL Link Errors parameters listed on the status
page:
Parameter Description
Link Retrains Number of DSL retrains since the gateway was last restarted, and the time
elapsed since the last retrain.
DSL Training Errors Number of failed DSL retrains since the gateway was last restarted, and the
elapsed time since the last failed retrain.
Training Timeouts Number of timeouts waiting for response from ATU-C since the 2Wire gateway
was last restarted, and the elapsed time since the last initialization timeout.
Loss of Framing Failures Number of DSL loss of framing failures since the gateway was last restarted,
and the elapsed time since the last line search initialization.
Loss of Signal Failures Number of DSL loss of signal failures since the 2Wire gateway was last
restarted, and the elapsed time since the last loss of signal failure.
Loss of Power Failures Number of DSL loss of power indications from the ATU-C since the gateway
was last restarted, and the elapsed time since the last loss of power
indication.
Loss of Margin Failures Number of DSL loss-of-margin failures at current data rate since the 2Wire
gateway was last restarted, and the elapsed time since the last loss of
margin failure.
Cum. Sec. w/Impulsive Events Number of impulsively errored seconds since the gateway was last restarted,
and the elapsed time since the last impulsively errored second.
Cum. Seconds w/Errors Number of cumulative errored seconds since the gateway was last restarted,
and the elapsed time since the last error.
Cum. Sec. w/Severe Errors Number of severely errored seconds since the gateway was last restarted,
and the elapsed time since the last severely errored second.
Corrected Blocks Number of corrected DSL superframes that have data errors detected during
reception.