Filter
Top Products
2-6 CHAPTER 2: INSTALLING THE 3C319 NIC
■ If you installed the 3C319 NIC in a PC running
Windows 95 with PnP, it will be configured
automatically when you install the driver. See
Chapter 4, “Installing a Network Driver for
Windows 95.”
After installing the NDIS 4 driver for Windows 95, you
have the option to enable DynamicAccess Class of
Service support for the 3C319 NIC. See Chapter 7,
“Configuring DynamicAccess Class of Service.”
■ If you installed the 3C319 NIC in a PC running
Windows NT, disable PnP before installing the driver.
See Chapter 5, “Configuring the NIC Manually,” for
instructions on disabling PnP. For Windows NT driver
installation instructions, see Chapter 6, “Installing a
Network Driver for Windows NT.”
After installing the NDIS 4 driver for Windows NT, you
have the option to enable DynamicAccess Class of
Service support for the 3C319 NIC. See Chapter 7,
“Configuring DynamicAccess Class of Service.”
■ If you installed the 3C319 NIC in a PC running
Windows for Workgroups with PnP, disable PnP before
installing the driver. See Chapter 5, “Configuring the
NIC Manually,” for instructions on disabling PnP.
For Windows for Workgroups driver installation
information, see “Installing a Driver for Windows for
Workgroups” in Chapter 8.
■ If you installed the 3C319 NIC in a PC without PnP, or
installed the NIC in a PC with a BIOS that does not
have a utility to recognize and configure PnP-enabled
devices, you must manually configure the NIC before
installing the driver. See Chapter 5, “Configuring the
NIC Manually,” and then see Chapter 8, “Manually
Installing Miscellaneous Network Drivers.”
Table 2-2 summarizes the installation procedures for
supported network environments.