Filter
Top Products
Installing the Client Driver for NetWare 8-5
5 When the NetWare Driver screen appears, select
Copy DOS ODI Client Driver.
6 At the prompt, accept the \NWCLIENT directory as
the default for the destination of the driver, or
enter a new path.
The NetWare driver and NET.CFG file are copied to
your PC.
7 Exit to DOS.
8 Edit the AUTOEXEC.BAT file and add the
following lines:
C:\
path
\LSL
C:\
path
\3CTOKEN
C:\
path
\IPXODI
C:\
path
\VLM
F:
LOGIN
C: \ path\ is the directory you choose for the NetWare
client files and the DOS ODI driver. Use the latest Novell
files from the Novell forum on the CompuServe site or
from your authorized reseller.
9 Edit your CONFIG.SYS file and include these
statements:
Files= <value>
Buffers= <value>
Lastdrive= Z
Novell recommends that <value> be at least 20 for
each statement.
10 Remove TokenDisk diskette #1 from the
floppy drive.
11 Reboot your PC.
This completes the manual NetWare DOS ODI client
driver installation.