Filter
Top Products
3-4 CHAPTER 3: INSTALLING NETWARE DOS CLIENTS AUTOMATICALLY
3 To accept the terms and conditions, type:
y
To view the full text of the license agreement, press [F1].
4 When the information screen appears, press [Enter]
to continue.
A status message appears, followed by a prompt for the
ring speed of your network.
5 Enter the ring speed and configuration mode and
press [Enter].
The default ring speed is 16 Mbps. The 3C319 NIC
operates at either 16 or 4 Mbps. The speed of the NIC
and the network must be the same. Ask your system
administrator for your network ring speed. See Chapter 5,
“Configuring the NIC Manually,” for details.
The configuration mode choices are 3Com or IBM mode.
The default configuration mode is 3Com mode. See
Chapter 5, “Configuring the NIC Manually,” for details.
A message states that the NIC’s configuration is complete.
6 Remove TokenDisk diskette #1 and press any key
to reboot your PC.
The login prompt for a NetWare server appears.
7 Log in to the NetWare server with your ID
and password.
Your PC is now configured as a NetWare DOS ODI client.
If you cannot connect to the NetWare server, see
Chapter 9, “Troubleshooting NIC Installation.”