Filter
Top Products
Before Configuring the NIC and Installing the Driver 2-7
If you encounter problems during any step of the
installation process, turn to Chapter 9, “Troubleshooting
NIC Installation,” for help.
Table 2-2 Installation Procedures for Supported Network Environments
Step
NetWare
DOS Client
Windows 95 Windows NT Others
1 Run AutoLink.
See Chapter
3,
“Installing
NetWare DOS
Clients
Automatically.”
Install driver.
See Chapter
4,
“Installing a
Network Driver
for
Windows 95.”
Boot DOS,
disable PnP, and
configure NIC.
See Chapter
5,
“Configuring the
NIC Manually.”
Boot DOS, disable
PnP, and configure
NIC.
See Chapter
5,
“Configuring the
NIC Manually.”
2 Configure
DynamicAccess
Class of Service.
See Chapter
7,
“Configuring
DynamicAccess
Class of
Service.”
Install driver.
See Chapter
6,
“Installing a
Network Driver
for
Windows NT.”
Install driver.
See Chapter
8,
“Manually Installing
Miscellaneous
Network Drivers.”
3 Configure
DynamicAccess
Class of Service.
See Chapter
7,
“Configuring
DynamicAccess
Class of
Service.”