Filter
Top Products
Installing the NDIS 4 Driver for Windows NT 6-3
5 In the Add Network Adapter dialog box, scroll to
the bottom of the Network Adapter Card selection
list. Select <Other> Requires disk from manufacturer.
6 Click Continue.
7 Type the following path at the prompt:
a:\
This path identifies the location of the NDIS 4
OEMSETUP.INF file for Windows NT 3.51.
8 Click OK to select the NIC.
The driver files are copied to the C: drive. A prompt
appears, asking if you want to restart your computer.
9 Remove the TokenDisk diskette and click
Restart now.
This completes the installation.
Auto ring speed detection is automatically enabled when
you install the NDIS 4 driver for Windows NT. If you want
to disable auto ring speed detection, see “Auto Ring
Speed Detection” in Chapter 7.
The DynamicAccess Class of Service feature is disabled
by default when you install the NDIS 4 driver for
Windows NT. To activate Class of Service, see Chapter 7,
“Configuring DynamicAccess Class of Service.”
Windows NT 4.0
Follow these steps to install the 3Com NDIS 4 driver for
Windows NT 4.0:
1 In the My Computer group, double-click the
Control Panel icon.
2 In the Control Panel group, double-click the
Network icon.
3 In the Network dialog box, click the Adapters tab.
4 In the Adapters tab, click Add.