Filter
Top Products
8-10 CHAPTER 8: MANUALLY INSTALLING MISCELLANEOUS NETWORK DRIVERS
10 Type H to boot your PC from your local hard
disk. Otherwise, the PC will boot from the
network server.
Disabling RPL
To disable RPL, use the following procedure:
1 Boot your PC under DOS.
2 Insert the backup copy of TokenDisk diskette #1 in a
floppy drive.
3 At the prompt, type:
3trdiag [Enter]
4 From the Install pull-down menu, select
Configure NIC.
5 Using the arrow keys, select Boot PROM.
6 Press [Enter], and select Disable.
7 Press [Enter].
8 Select OK and press [Enter] to save the setting.
9 Remove the diskette from the drive and reboot
the PC.