Filter
Top Products
4
DOCUMENTATION CHANGES
This chapter describes information that is either incorrect or not
documented in the indicated Switch 4005 manuals.
In these release notes, the Switch Fabric Management Module is referred
to as the SFMM for brevity.
Switch 4005 Key
Information Guide
This section describes issues that apply to the Switch 4005 Key
Information Guide.
■ Page 10, item 10 now includes the following additional interface
modules:
■ Model Number 3C16832 holds five 2-port 1000BASE-T Interface
Modules (3C16841) in slots 1 through 5.
■ Model Number 3C16833 holds five 2-port 1000BASE-SX Interface
Modules (3C16842) in slots 1 through 5.
Switch 4005
Installation and
Maintenance Guide
This section describes issues that apply to the Switch 4005 Installation
and Maintenance Guide (Published April 2001).
■ Page 9, second Information Note, second sentence should read
“However, you can install a second (redundant) SFMM to provide
standby management support.”
■ Page 11, Product Overview, first paragraph, second sentence should
read “The Switch 4005 currently supports redundant power supplies,
redundant Switch Fabric Management Modules, and a variety of Fast
Ethernet and Gigabit Ethernet Interface Modules.”
■ Page 11, Physical Description, third bullet, first paragraph should read
“Only one SFMM is required for normal operation. If the SFMM is
removed from a powered up chassis that is functioning in a network,
chassis operations will cease. However, if a backup SFMM is installed