Filter
Top Products
18 CHAPTER 5: SOFTWARE INSTALLATION
Checking Software
Release Numbers
The release numbers for software release 1.1 are shown in the following
table.
How to Obtain
Software Image
Files
To obtain image files for software Release 1.1, contact your network
supplier or 3Com representative, or visit the 3Com Web site at:
http://support.3com.com/infodeli/swlib/index.htm
Installation and
Upgrade
Prerequisites
Before you upgrade the modules to Release 1.1, read this section for
important procedures.
■ Have ready the software upgrades and associated release notes for
the SFMM that you are upgrading.
To obtain software upgrades and release notes, see your network
supplier or 3Com representative, or visit the 3Com Web site at:
http://support.3com.com/infodeli/swlib/index.htm
■ If you have a new SFMM that uses software Release 1.1, you can now
install your module in slot M1 or M2. See the Switch 4005 Installation
and Maintenance Guide for guidelines and procedures.
Table 2 Current Software Release Numbers and Default Filenames
Description Model Pre-loaded Software Release Filename
Switch Fabric Management
Module (SFMM)
3C16824 Management
Post code 1.00
Runtime code 1.1
postV100.bix
4005V11.bix