3Com 4005 Switch User Manual


 
2
RELEASE ISSUES FOR SWITCH
FABRIC MANAGEMENT MODULES
This chapter addresses the issues for the Switch 4005 Switch Fabric
Management Module at the release numbers cited in Table 1 on page 5.
The topics are:
Operating Considerations
Known Problems
In these release notes, the Switch Fabric Management Module is referred
to as the SFMM for brevity.
Operating
Considerations
This section describes operating considerations that apply to the SFMM at
this release:
To indicate progress during TFTP Download, the byte indicator needs
to be set on the TFTP server.
During the download process system error messages are displayed on
the local console interface only.
Do not attempt to perform any management tasks while you are
downloading software to the SFMM.
While you are downloading a file, do not close the console window
that you used to execute the command.
All new SFMM modules are shipped with V1.1 runtime code. If you
upgrade the runtime code for an existing SFMM from V1.01 to V1.1,
all configuration information is retained. Refer to “Downloading
to an SFMM” on page 21.
Before you install a secondary SFMM in the chassis, refer to
“Download procedure for a chassis using a secondary SFMM” on
page 19.